HK-04G-LZ-107
lever canza micro sauya smd ƙaramin micro sauya KW12
| (Halayen ma'anar aiki) | (Aikin Ma'auni) | (Taƙaice) | (Raka'a) | (darajar) |
|
| (Mataki Kyauta) | FP | mm | 12.1 ± 0.2 |
| (Matsayin Aiki) | OP | mm | 11.5 ± 0.5 | |
| (Matsayin Saki) | RP | mm | 11.7± 0.5 | |
| (Jimlar Matsayin tafiya) | TTP | mm | 10.5± 0.3 | |
| (Karfin Aiki) | OF | N | 1.0 zuwa 3.5 | |
| (Karfin Saki) | RF | N | - | |
| (Jimlar tafiye-tafiye Force) | TTF | N | - | |
| (Kafin Tafiya) | PT | mm | 0.3 zuwa 1.0 | |
| (A kan Tafiya) | OT | mm | 0.2 (min) | |
| (Bambancin Motsi) | MD | mm | 0.4 (Max) |
Canja Halayen fasaha
| (ITEM) | (ma'auni na fasaha) | (Daraja) | |
| 1 | (Kimanin Lantarki) | 5 (2) A 250VAC | |
| 2 | (Contact Resistance) | ≤50mΩ(ƙimar farko) | |
| 3 | (Juriya na Insulation) | ≥100MΩ(500VDC) | |
| 4 | (Dielectric Voltage) | (tsakanin tashoshin da ba a haɗa su ba) | 500V/0.5mA/60S |
|
|
| (tsakanin tashoshi da karfen karfe) | 1500V/0.5mA/60S |
| 5 | (Rayuwar Wutar Lantarki) | ≥10000 hawan keke | |
| 6 | (Rayuwar Makanikai) | ≥100000 hawan keke | |
| 7 | (Aikin Zazzabi) | -25 ~ 125 ℃ | |
| 8 | (Yawan Aiki) | (lantarki): 15hawan keke (Makanikanci): 60hawan keke | |
| 9 | (Hujja ta Jijjiga) | (Yawan Vibration): 10 ~ 55HZ; Girman girma: 1.5mm; (Hanyoyi uku): 1H | |
| 10 | (Irin Solder): (Fiye da kashi 80% na ɓangaren da aka nutsar za a rufe shi da mai siyarwa) | (Siyarwa Zazzabi): 235 ± 5 ℃ (Lokaci Mai Tsarki): 2～3S | |
| 11 | (Solder Heat Resistance) | (Dip Soldering): 260± 5℃ 5± 1S (Sayar da Manual): 300± 5℃ 2～3S | |
| 12 | ( Amincewa da Tsaro ) | UL, CSA, VDE, ENEC, CE | |
| 13 | (Sharuɗɗan gwaji) | (Zazzabi na yanayi) ：20± 5℃ (Humidity na Dangi): 65± 5% RH (Matsin Iska): 86 ~ 106KPa | |
Menene aikin maƙallan wutar lantarki?
Mutane da yawa suna tambayar menene aikin micro switch da aka sanya a cikin injin ruwa? Da farko dai, micro switch shine yin amfani da matsa lamba na ruwa don tura micro switch don kunnawa lokacin da kuka kunna wutar lantarki don sarrafa sashin kula da wutar lantarki don yin aiki: babban matsi da wutan solenoid bude. (Lokacin da aka sami matsa lamba na ruwa, ana buɗe kewaye ta atomatik. Lokacin da babu ruwa, ana rufe da'ira ta atomatik).
Shawarar labari mai kyau: Yadda za a shigar da micro switch, da fatan za a koma ga amsar?
Idan micro switch ya yi gajeriyar kewayawa, ba za a sarrafa na'urar bututun ruwa ba, kuma tukunyar ruwan ku za ta ci gaba da aiki (matsi mai ƙarfi yana ci gaba da ci gaba da kunna wuta kuma bawul ɗin solenoid yana ci gaba).
Don sarrafa wutar lantarki, dole ne ku yi amfani da maɓalli na micro. Ba za a iya amfani da shi a cikin gajeren kewaye ba. Ta wannan hanyar, bawul ɗin solenoid koyaushe yana buɗe lokacin da ba ku amfani da injin ruwa, kuma iskar gas ɗin za ta saki kuma ta haifar da haɗari.
A ina ne micro switch yake?
Maɓalli na matattarar ruwan gas gabaɗaya yana kan igiyar wutar lantarki. Za a sami mahaɗin murabba'i a kan igiyar wutar lantarki, sannan za ku ga maɓallin ja da rawaya, wanda ke wakiltar ɗaya a kunne da ɗaya; na'urar dumama ruwan gas na gaba ɗaya a ƙasan tsakiyar na'urar, za ku kwance harsashin injin ɗin, sannan ku kunna maɓallin shigar ruwa na na'urar, za ku ga cewa mai jan ciki zai motsa micro switch.
Micro switch yana taka muhimmiyar rawa a cikin na'urar dumama ruwa, saboda wutar lantarkin ruwa, kunna bawul na solenoid, da dai sauransu duk ana sarrafa su ta hanyar micro switch, wanda yayi daidai da micro switch ba a rufe kuma duk ba zai yi aiki ba.
